Solid State VSWR MW – 2038



  • Model MW – 2038 is a calibrated high gain amplifier tuned at one frequency to be used for measurement of VSWR, impedance and relative power levels. The meter indicates the signal level in proportion to the input, which is calibrated directly in VSWR and db.
  • Input Selector Switch is provided for NORMAL and EXPAND range.



Amplifier type High gain tuned at one frequency.
Frequency 1000 Hz ± 2%.
Sensitivity 0.1 microvolt at 200 ohms for full scale.
Band-width 25-30 Hz.
Noise-level Less than 0.02 microvolt.
Range 70 db min. in 10 db steps.
Accuracy ± 0.15 db on one range.
Meter-Linearity 1% of full scale.
Scale-Selector Normal, Expand.
Gain-Control ‘Coarse’ & ‘Fine’.
Input BNC (F), 200 ohms impedance
Mains Power 230 V, 50 Hz
Standard Accessories i) Instruction Manual (1 No.)

ii) Mains Cord (1 No.)

iii) Coax, cable BNC to BNC (1 No.)

iv) Spare Fuse (2 Nos.)